Products›Busbars›Pin type, 4-phase busbars P-4L
P-4L Series · Pin Type · 4 Phase

Pin type, 4-phase busbars P-4L

Pin-type four-phase copper busbars for compatible modular protective devices in distribution boards and control panels.

Pin typeConnection type
4 phasePhase configuration
17.8 mmDevice pitch (B)
8–16 mm²Cross-section range
Technical data
KASEEY Pin type, 4-phase busbars P-4L01 / PRODUCT VIEW

The P-4L series uses a 17.8 mm device pitch with 4 mm-wide, 11.5 mm-long pin contacts. Published configurations cover 210 and 1016 mm lengths, 12 and 56 modules, conductor cross-sections from 8 to 16 mm² and reference currents from 50 to 80 A. The drawing shows the repeating L1, L2, L3 and N sequence for four-phase distribution.

02 / TECHNICAL DATA

P-4L published models and dimensions

Choose the required conductor cross-section, finished length and module count. Dimensions B, C, D and F correspond to the published drawing; all dimensional values are in millimetres.

Product foundation

Connection typePin type
Phase configuration4 phase
Device pitch (B)17.8 mm
Cross-section range8–16 mm²
Pin width (C)4 mm
Pin length (D)11.5 mm
Published lengths (F)210 / 1016 mm
Published module counts (E)12 / 56 modules
Reference current range (G)50–80 A

P-4L dimension drawing

KASEEY P-4L pin type 4-phase busbar dimension drawing showing B, C, D and F dimensions
SELECT BY CONDUCTOR

Published sizes & dimensions

Choose a conductor size to select its published order model and dimensional row.

Active order modelP-4L-210/88 mm² conductor size
Conductor size8 published models
MODEL MATRIX

Published model matrix

Select any row to prepare an enquiry for that order model.

Order selectionPublished data
SelectOrder modelConductor sizeArticle No.A Cross SectionB DistanceC Width of PinD Length of PinE ModulesF LengthG Reference Current
8 mm²KP041208817.8411.51221050 A
10 mm²KP0412101017.8411.51221063 A
13 mm²KP0412131317.8411.51221070 A
16 mm²KP0412161617.8411.51221080 A
8 mm²KP045608817.8411.556101650 A
10 mm²KP0456101017.8411.556101663 A
13 mm²KP0456131317.8411.556101670 A
16 mm²KP0456161617.8411.556101680 A

Published dimensions are shown in millimetres unless another unit is displayed. Include the application, quantity and installation requirements in your enquiry.

03 / PRODUCT SELECTION

Quote the selected Pin type, 4-phase busbars P-4L size.

Select the required conductor size above, then send the chosen order model with your quantity and application details.

PUBLISHED CONDUCTOR SIZE
8mm²
ORDER MODELP-4L-210/8Ready for enquiry
Published dimensionsmm
Article No.KP041208
A Cross Section8mm²
B Distance17.8mm
C Width of Pin4mm
D Length of Pin11.5mm
E Modules12
F Length210mm
G Reference Current50 A
Change size in the table
04 / APPLICATIONS

Where P-4L busbars are used

01

Four-phase distribution boards

Common-feed connections across compatible four-phase modular protective devices using L1, L2, L3 and N pin terminals.

02

Control panels

Organized four-phase power distribution where 17.8 mm pitch and the P-4L pin geometry are required.

03

OEM panel assemblies

Repeat panel builds selected by Article No., cross-section, module count and finished length.

05 / RESOURCES

P-4L documents and product support

Use the published model table and dimension drawing for initial selection, then request controlled documentation with your enquiry.

What is the P-4L phase configuration?

P-4L is the pin type 4-phase busbar range for L1, L2, L3 and N distribution. Select the published Article No. that matches the required cross-section, length and module count.

What changes between P-4L order models?

The Article No., conductor cross-section, module count, overall length and reference current vary by model. The 17.8 mm pitch, 4 mm pin width and 11.5 mm pin length remain the same in the supplied table.

READY FOR SELECTION?

Confirm Pin type, 4-phase busbars P-4L for your application.