Products›Busbars›Pin type, 2 phase busbars (C45)
C45 Series · Pin Type · 2 Phase

Pin type, 2 phase busbars (C45)

Pin-type two-phase busbars for compatible C45 modular protective devices in distribution boards and control panels.

Pin typeConnection type
2 phase (C45)Phase configuration
17.8 mmDevice distance (B)
8–16 mm²Cross-section range
Technical data
KASEEY Pin type, 2 phase busbars (C45)01 / PRODUCT VIEW

The two-phase C45 range uses a 17.8 mm device distance with 5.5 mm-wide, 11.5 mm-long pin contacts. Published configurations cover 210, 1000 and 1016 mm lengths, 12, 54 and 56 modules, conductor cross-sections from 8 to 16 mm² and reference currents from 50 to 80 A.

02 / TECHNICAL DATA

C45 2-phase published models and dimensions

Choose the required conductor cross-section, finished length and module count. Dimensions B, C, D and F correspond to the supplied drawing; all dimensional values are in millimetres.

Product foundation

Connection typePin type
Phase configuration2 phase (C45)
Device distance (B)17.8 mm
Cross-section range8–16 mm²
Pin width (C)5.5 mm
Pin length (D)11.5 mm
Published lengths (F)210 / 1000 / 1016 mm
Published module counts (E)12 / 54 / 56 modules
Reference current range (G)50–80 A

C45 2-phase dimension drawing

KASEEY C45 pin type 2-phase busbar dimension drawing showing B, C, D and F dimensions
SELECT BY CONDUCTOR

Published sizes & dimensions

Choose a conductor size to select its published order model and dimensional row.

Active order modelC-2L-210/88 mm² conductor size
Conductor size12 published models
MODEL MATRIX

Published model matrix

Select any row to prepare an enquiry for that order model.

Order selectionPublished data
SelectOrder modelConductor sizeArticle No.A Cross SectionB DistanceC Width of PinD Length of PinE ModulesF LengthG Reference Current
8 mm²KC021208817.85.511.51221050 A
10 mm²KC0212101017.85.511.51221063 A
13 mm²KC0212131317.85.511.51221070 A
16 mm²KC0212161617.85.511.51221080 A
8 mm²KC025408817.85.511.554100050 A
10 mm²KC0254101017.85.511.554100063 A
13 mm²KC0254131317.85.511.554100070 A
16 mm²KC0254161617.85.511.554100080 A
8 mm²KC025708817.85.511.556101650 A
10 mm²KC0257101017.85.511.556101663 A
13 mm²KC0257131317.85.511.556101670 A
16 mm²KC0257161617.85.511.556101680 A

Published dimensions are shown in millimetres unless another unit is displayed. Include the application, quantity and installation requirements in your enquiry.

03 / PRODUCT SELECTION

Quote the selected Pin type, 2 phase busbars (C45) size.

Select the required conductor size above, then send the chosen order model with your quantity and application details.

PUBLISHED CONDUCTOR SIZE
8mm²
ORDER MODELC-2L-210/8Ready for enquiry
Published dimensionsmm
Article No.KC021208
A Cross Section8mm²
B Distance17.8mm
C Width of Pin5.5mm
D Length of Pin11.5mm
E Modules12
F Length210mm
G Reference Current50 A
Change size in the table
04 / APPLICATIONS

Where C45 2-phase busbars are used

01

C45 two-phase boards

Organized two-phase feed connections for compatible C45 modular protective devices.

02

Control panels

Structured two-phase distribution where the 17.8 mm device distance and C45 pin geometry are required.

03

OEM panel assemblies

Repeat panel builds selected by Article No., cross-section, module count and finished length.

05 / RESOURCES

C45 2-phase documents and product support

Use the published model table and dimension drawing for initial selection, then request controlled documentation with your enquiry.

What is common across the C45 2-phase models?

The supplied table specifies a 17.8 mm device distance, 5.5 mm pin width and 11.5 mm pin length across all 12 models.

What changes between C45 2-phase order models?

The Article No., conductor cross-section, module count, finished length and reference current vary by row. The two-phase L1/L2/N sequence is shown in the supplied drawing.

READY FOR SELECTION?

Confirm Pin type, 2 phase busbars (C45) for your application.