Products›Busbars›Pin type, 1P+N-LE busbars DPN-LE
DPN-LE Series · Pin Type · 1P+N-LE

Pin type, 1P+N-LE busbars DPN-LE

Pin-type 1P+N-LE busbars for DPN-LE modular protective-device assemblies in distribution boards and control panels.

Pin typeConnection type
1P+N-LE (DPN-LE)Phase configuration
9 mmPrimary distance (B1)
27 mmSecondary distance (B2)
Technical data
KASEEY Pin type, 1P+N-LE busbars DPN-LE01 / PRODUCT VIEW

The DPN-LE range combines line and neutral distribution with a two-distance busbar profile. The published table covers 9 mm B1 distance, 27 mm B2 distance, 4 mm-wide and 14.5 mm-long pin contacts, 210 and 1000 mm lengths, 12 and 54 modules, and 50–80 A reference current.

02 / TECHNICAL DATA

DPN-LE published models and dimensions

Choose the required conductor cross-section and finished length. Dimensions B1, B2, C, D and F correspond to the supplied drawing; all dimensional values are in millimetres.

Product foundation

Connection typePin type
Phase configuration1P+N-LE (DPN-LE)
Primary distance (B1)9 mm
Secondary distance (B2)27 mm
Cross-section range8–16 mm²
Pin width (C)4 mm
Pin length (D)14.5 mm
Published lengths (F)210 / 1000 mm
Published module counts (E)12 / 54 modules
Reference current range (G)50–80 A

DPN-LE dimension drawing

KASEEY DPN-LE pin type 1P+N busbar dimension drawing showing B1, B2, C, D and F dimensions
SELECT BY CONDUCTOR

Published sizes & dimensions

Choose a conductor size to select its published order model and dimensional row.

Active order modelP-1+N-LE-210/88 mm² conductor size
Conductor size8 published models
MODEL MATRIX

Published model matrix

Select any row to prepare an enquiry for that order model.

Order selectionPublished data
SelectOrder modelConductor sizeArticle No.A Cross SectionB1 DistanceB2 DistanceC Width of PinD Length of PinE ModulesF LengthG Reference Current
8 mm²KP0712088927414.51221050 A
10 mm²KP07121010927414.51221063 A
13 mm²KP07121313927414.51221070 A
16 mm²KP07121616927414.51221080 A
8 mm²KP0754088927414.554100050 A
10 mm²KP07541010927414.554100063 A
13 mm²KP07541313927414.554100070 A
16 mm²KP07541616927414.554100080 A

Published dimensions are shown in millimetres unless another unit is displayed. Include the application, quantity and installation requirements in your enquiry.

03 / PRODUCT SELECTION

Quote the selected Pin type, 1P+N-LE busbars DPN-LE size.

Select the required conductor size above, then send the chosen order model with your quantity and application details.

PUBLISHED CONDUCTOR SIZE
8mm²
ORDER MODELP-1+N-LE-210/8Ready for enquiry
Published dimensionsmm
Article No.KP071208
A Cross Section8mm²
B1 Distance9mm
B2 Distance27mm
C Width of Pin4mm
D Length of Pin14.5mm
E Modules12
F Length210mm
G Reference Current50 A
Change size in the table
04 / APPLICATIONS

Where DPN-LE busbars are used

01

DPN-LE distribution boards

Line-and-neutral feed connections for compatible 1P+N-LE modular protective devices.

02

Control panels

Organized 1P+N distribution where the 9 mm B1 and 27 mm B2 profile is required.

03

OEM panel assemblies

Repeat panel builds selected by Article No., cross-section, module count and finished length.

05 / RESOURCES

DPN-LE documents and product support

Use the published model table and dimension drawing for initial selection, then request controlled documentation with your enquiry.

What do B1 and B2 represent in the DPN-LE drawing?

B1 is the 9 mm primary device distance and B2 is the 27 mm secondary distance shown in the supplied DPN-LE drawing.

What changes between DPN-LE order models?

The Article No., conductor cross-section, module count, finished length and reference current vary by row. The 9 mm B1, 27 mm B2, 4 mm pin width and 14.5 mm pin length remain consistent in the supplied table.

READY FOR SELECTION?

Confirm Pin type, 1P+N-LE busbars DPN-LE for your application.