Products›Busbars›Pin type, 1P+N busbars V
V Series · Pin Type · 1P+N

Pin type, 1P+N busbars V

V-series pin busbars for compact 1P+N distribution across compatible DPN and modular protective devices.

Pin typeConnection type
1P+NPhase configuration
VSeries variant
8.9 mmDevice distance (B)
Technical data
KASEEY Pin type 1P+N busbars V product view01 / PRODUCT VIEW

The V series uses an 8.9 mm device distance with 4 mm-wide, 12 mm-long pin contacts. Published configurations cover 210 and 1000 mm lengths, 24 and 108 modules, conductor cross-sections from 8 to 16 mm² and reference currents from 50 to 80 A.

02 / TECHNICAL DATA

V-series published models and dimensions

Choose the required conductor cross-section, finished length and module count. Dimensions B, C, D and F correspond to the supplied V-series drawing; all dimensional values are in millimetres.

Product foundation

Connection typePin type
Phase configuration1P+N
Series variantV
Device distance (B)8.9 mm
Cross-section range8–16 mm²
Pin width (C)4 mm
Pin length (D)12 mm
Published lengths (F)210 / 1000 mm
Published module counts (E)24 / 108 modules
Reference current range (G)50–80 A

V-series dimension drawing

KASEEY Pin type 1P+N busbars V dimension drawing showing B, C, D and F dimensions
SELECT BY CONDUCTOR

Published sizes & dimensions

Choose a conductor size to select its published order model and dimensional row.

Active order modelP-1+N-210/8V8 mm² conductor size
Conductor size8 published models
MODEL MATRIX

Published model matrix

Select any row to prepare an enquiry for that order model.

Order selectionPublished data
SelectOrder modelConductor sizeArticle No.A Cross SectionB DistanceC Width of PinD Length of PinE ModulesF LengthG Reference Current
8 mm²KP071208V88.94122421050 A
10 mm²KP071210V108.94122421063 A
13 mm²KP071213V138.94122421070 A
16 mm²KP071216V168.94122421080 A
8 mm²KP075408V88.9412108100050 A
10 mm²KP075410V108.9412108100063 A
13 mm²KP075413V138.9412108100070 A
16 mm²KP075416V168.9412108100080 A

Published dimensions are shown in millimetres unless another unit is displayed. Include the application, quantity and installation requirements in your enquiry.

03 / PRODUCT SELECTION

Quote the selected Pin type, 1P+N busbars V size.

Select the required conductor size above, then send the chosen order model with your quantity and application details.

PUBLISHED CONDUCTOR SIZE
8mm²
ORDER MODELP-1+N-210/8VReady for enquiry
Published dimensionsmm
Article No.KP071208V
A Cross Section8mm²
B Distance8.9mm
C Width of Pin4mm
D Length of Pin12mm
E Modules24
F Length210mm
G Reference Current50 A
Change size in the table
04 / APPLICATIONS

Where V-series busbars are used

01

Compact 1P+N boards

Compact line-and-neutral feed connections for compatible DPN modular devices.

02

Control panels

Organized 1P+N distribution where 8.9 mm device distance and V-series pin geometry are required.

03

OEM panel assemblies

Repeat panel builds selected by Article No., cross-section, module count and finished length.

05 / RESOURCES

V-series documents and product support

Use the published model table and dimension drawing for initial selection, then request controlled documentation with your enquiry.

How is the V series different from the DPN series?

The V series uses an 8.9 mm device distance and 12 mm pin length, while the DPN record is maintained as a separate 9 mm / 11.5 mm geometry.

What changes between V-series order models?

The Article No., conductor cross-section, module count, finished length and reference current vary by row. The 8.9 mm distance, 4 mm pin width and 12 mm pin length remain the same in the supplied table.

READY FOR SELECTION?

Confirm Pin type, 1P+N busbars V for your application.