Products›Busbars›Pin type, 1P closed busbars (P-1L-DA)

P-1L-DA Series · Closed · Pin Type · 1P

Pin type, 1P closed busbars (P-1L-DA)

P-1L-DA pin-type closed 1P busbars for compact compatible modular protective devices and OEM panel assemblies.

Pin type · closed housingConnection type

1PPhase configuration

P-1L-DASeries variant

17.8 mmDevice distance (B)

Technical data

KASEEY Pin type 1P closed busbars P-1L-DA product view

01 / PRODUCT VIEW

The P-1L-DA range uses a 17.8 mm device distance with 4 mm-wide, 13.5 mm-long pin contacts in a closed housing. The published configurations use 10 mm² conductors, 2 to 6 modules, 30, 44, 64, 81 and 103 mm finished lengths, all at a 63 A reference current.

02 / TECHNICAL DATA

P-1L-DA published models and dimensions

Choose the required compact finished length and module count. Dimensions B, C and D correspond to the supplied drawing; all dimensional values are in millimetres.

Product foundation

Connection typePin type · closed housing

Phase configuration1P

Series variantP-1L-DA

Device distance (B)17.8 mm

Cross-section10 mm²

Pin width (C)4 mm

Pin length (D)13.5 mm

Published lengths (F)30 / 44 / 64 / 81 / 103 mm

Published module counts (E)2 / 3 / 4 / 5 / 6 modules

Reference current (G)63 A

P-1L-DA dimension drawing

SELECT BY CONDUCTOR

Published sizes & dimensions

Choose a conductor size to select its published order model and dimensional row.

Active order modelP-1L-30/10DA10 mm² conductor size

Conductor size5 published models

MODEL MATRIX

Published model matrix

Select any row to prepare an enquiry for that order model.

Order selection			Published data
Select	Order model	Conductor size	Article No.	A Cross Section	B Distance	C Width of Pin	D Length of Pin	E Modules	F Length	G Reference Current
		10 mm²	KP010210DA	10	17.8	4	13.5	2	30	63 A
		10 mm²	KP010310DA	10	17.8	4	13.5	3	44	63 A
		10 mm²	KP010410DA	10	17.8	4	13.5	4	64	63 A
		10 mm²	KP010510DA	10	17.8	4	13.5	5	81	63 A
		10 mm²	KP010610DA	10	17.8	4	13.5	6	103	63 A

Published dimensions are shown in millimetres unless another unit is displayed. Include the application, quantity and installation requirements in your enquiry.

03 / PRODUCT SELECTION

Quote the selected Pin type, 1P closed busbars size.

Select the required conductor size above, then send the chosen order model with your quantity and application details.

PUBLISHED CONDUCTOR SIZE

10mm²

ORDER MODELP-1L-30/10DAReady for enquiry

Published dimensionsmm

Article No.KP010210DA

A Cross Section10mm²

B Distance17.8mm

C Width of Pin4mm

D Length of Pin13.5mm

E Modules2

F Length30mm

G Reference Current63 A

Change size in the table

04 / APPLICATIONS

Where P-1L-DA closed busbars are used

Compact 1P distribution boards

Short single-pole feed connections for compatible modular protective devices in a closed housing.

Control panels

Compact 1P distribution where the 17.8 mm device distance, 4 mm pin width and 13.5 mm pin length are required.

OEM panel assemblies

Repeat compact builds selected by Article No., module count and finished length.

05 / RESOURCES

P-1L-DA documents and product support

Use the published model table and dimension drawing for initial selection, then request controlled documentation with your enquiry.

What is the P-1L-DA geometry?

The published rows use a 17.8 mm device distance, 4 mm pin width and 13.5 mm pin length inside a closed 1P housing.

What changes between P-1L-DA order models?

The Article No., module count and finished length vary by row; the 10 mm² cross-section and 63 A reference current remain constant.

READY FOR SELECTION?